• Visit us at:

Call us @ 1 877 DRS-TOYS

 
 

Midmark Ritter M7 Speedclave - Autoclave (REFURB)

Be the first to review this product

Availability: In stock

$1,500.00
OR

Quick Overview

The speedy M7 is the perfect choice for anyone looking for an effective, manual autoclave... at an unbelievably low price. It sterilizes both wrapped and unwrapped instruments, linen packs and glassware. From a cold start, unwrapped instruments take only 9 minutes... starting hot, it’s just 6 minutes! The M7, the “workhorse of sterilizers,” is an investment that will last... and last.

THIS UNIT IS REFURBISHED

1 YEAR WARRANTY

Midmark Ritter M7 Speedclave - Autoclave (REFURB)

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

Details

The speedy M7 is the perfect choice for anyone looking for an effective, manual autoclave... at an unbelievably low price. It sterilizes both wrapped and unwrapped instruments, linen packs and glassware. From a cold start, unwrapped instruments take only 9 minutes... starting hot, it’s just 6 minutes! The M7, the “workhorse of sterilizers,” is an investment that will last... and last. M7 SpeedClave Features: Safety Door The safety door on this autoclave automatically seals when pressurized and will not allow the operator to open the door until the chamber is safely depressurized. Temperature Regulator The temperature regulator allows the operator to preset the temperature at a desired setting between 250º F (121º C) and 270º F (132º C). This control, acting as a thermostat, cycles the heating element on and off. Temperature Gauge The temperature gauge indicates the temperature inside the chamber. The gauge is graduated in two-degree increments from 80º F (26.7º C) to 270º F (132º C). Low Water Cut-out Switch The low water cut-out switch prevents “dry burning”. The M7 autoclave will operate only when there is enough water present, which prolongs the life of the heating element. A pilot light is on when the heater is on and cycles on and off during normal operation. Cycle Timer The cycle timer regulates sterilization time from 0 to 30 minutes and automatically turns the M7 off when the sterilization cycle is complete. This prevents over-sterilization thus extending the service life of your instruments. Front Draining Feature With our front draining feature, it's easy to clean and maintain. All controls and information are on the front and easily accessible to the operator. INSTALLATION Use on laminate, stainless steel or stone surfaces. Allow 2.5" (6.4 cm) on sides and rear and 12" (30.5 cm) above, to allow space to fill the reservoir and for cooling processed trays. SPECIFICATIONS Overall length: 18.12" (46 cm) Overall width: 13.56" (34.4 cm) Overall height: 12.81" (32.5 cm) Countertop area: Minimum depth 16.5" (41.9 cm) Chamber: 7.5" diameter (19.1 cm) - 15" depth (38.1 cm) - 2.4 gal. usable volume (9.0 liters) Trays: Two large – 12" L x 5.62" W x .88" D (30.5 x 14.3 x 2.2 cm) - One small – 12" L x 4.12" W x .88" D (30.5 x 10.5 x 2.2 cm) Unit weight: 30 lbs. (13.6 kg) Shipping weight: 39 lbs. (17.7 kg) Water reservoir capacity: 1.31 gal. (4.9 liters) Electrical Requirements: 120 VAC, 60 Hz, 10 AMPS Single Phase - 120 VAC has 1136 watt tubular immersion heater UL and CUL Listed - CSA Certified - 220-240 VAC, 50 Hz, 5 AMPS - 100 VAC, 60 Hz, 12 AMPS

Additional Information

condition N/A

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.